A30S - Short Action

Description

• Available in three different bolt face sizes:

  • .384" - Caliber such as .223 Remington

  • .470" - calibers such as 6.5 Creedmoor and .308 Winchester

  • .540" - calibers such as 6.5 PRC

• Incredibly smooth repeating due to:

  • optimized geometry at the closure

  • Significantly more complex pretreatment processes for PVD coating

• Rem. 700 Footprint (1.35" Multi Flat)

• 60° opening angle (bolt throw)

• Weight 880 grams

• Integral Recoil Lug recoil lug) - thickness: 6.35 mm / 0.25"

• Integral Picatinny Rail 1913 MIL-Spec) with 20 MOA forward tilt

• Plasma nitrided surfaces for maximum durability

• PVD coating for optimum sliding properties and corrosion protection. Coating variants:

  • Receiver and bolt in DLC (anthracite)

  • Receiver in DLC (anthracite) and bolt in TiN (titanium nitride) (gold)

• Even more optimized layer adhesion of PVD coatings

• Lock Time 1.6 ms (nominal)

• Ignition energy adjustable - particularly important when using high-quality ignition caps

• Material: 1.6582+QT / AISI 4340 prehardened

• Headspace guaranteed ±0.025 mm / ±0.001"

• Barrel thread: 1.1/16"-16 UN with centering via interference fit

• Wire EDM'ed Race Ways

• Gas nitrided surfaces on all small parts

• Extractor

• 2-stage Ejector (plunger ejector)

• Latch catch positioned on the side

• Trigger hanger available (7000 series aluminum)

• Bolt handle made of 7000 series aluminum - black hard anodized (50 µm)

• AICS Magazine compatible

• Extended Magazine Cutout

• Bolt Handle (5/16-24 UNF thread)

• Fastening of flicker strips using 6-40 UNF

• Side vent holes for pressure relief in case of sleeve bursting

• Firing pin dimensioning according to ÖNORM S 1200